Pasito Mini 1.0 - Outside Lighting

step light for outdoor applications
recessed, flush (wall)
Power: 6W (230Vac), 5W (24Vdc)
Power supply: 230Vac, 24Vdc
Lumen output at source: 383 lm (3000K, CRI 80), 355 lm (3000K, CRI 90)
Delivered lumen output: 214 lm (3000K, asymmetrical 150°x90°, CRI 80, white finish), 195 lm (3000K, 60°, CRI 80, white finish), 186 lm (3000K, asymmetrical 150°x90°, CRI 90, white finish), 170 lm (3000K, 60°, CRI 90, white finish)
1 power LED High Intensity, 3-step MacAdam, 50 000h L90 B10 (Ta 25°C)
LED colour: 2700K, 3000K, 4000K
Optics: 60°: optical system consisting of a 60° hemispherical lens, installed at an angle and set back in the chamber to to create a controlled downward light beam, reducing light spill to a minimum, asymmetrical 150°x90°: optical system consisting of an asymmetrical hemispherical lens, installed at an angle and set back in the chamber to to create a controlled downward light beam, reducing light spill to a minimum
CRI: 80, 90
Body material: body made of ANTICORODAL 6060 low-copper-content aluminium alloy, made from an extruded profile, then anodized black to give the product better heat dissipation and increase its resistance to corrosion. Structured reflector made of extruded ANTICORODAL 6060 aluminium, painted in the same colour
Finishes: anthracite finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, grey finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, cor-ten finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, white finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector
RAL finish on request
230Vac: power supply unit included, 24Vdc: power supply unit not included
230Vac version: includes 0.20 m neoprene cable, H05RN-F 2x1.00 Ø7 mm;  24Vdc version: includes 0.30 m neoprene cable, H05RN-F 2x0.35/0.75 Ø6.3 mm
Ingress protection: IP65
Impact resistance: IK05
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit
Operating temperature: -20°C — +45°C
Maximum device temperature: 50°C (Ta 25°C)
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: II (230Vac), III (24Vdc)
Weight: 350 g (230Vac), 300 g (24Vdc)
Dimensions: 84x67x161 mm
Cutout dimensions: 86x165 mm
Energy efficiency class: A / A+ / A++
Accessories: WCA00E Outer casing - white, WCA00F Outer casing - grey, WCA00H Outer casing - anthracite, WCA00T Outer casing - cor-ten
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption